NBB4-12M45-Z5-0.33M-V1 Compatible Proximity Switch for Haas CNC - 2-Wire NC, 4mm Flush, 10-30V, M12 Plug, 0.33m Cable
Haas-compatible NBB4-12M45-Z5-0.33M-V1 inductive proximity switch – 2-wire normally closed, 10-30 V, 4 mm flush sensing, M12 plug on a 0.33 m lead. Compatible (non-genuine) replacement, not a Haas product.
NBB4-12M45-Z5-0.33M-V1 compatible proximity switch for Haas CNC machines
A 12 mm flush-mounting inductive proximity sensor intended as a replacement for the Haas axis reference, zero return and tool setting sensor of the same type code. The sensor detects a ferrous target at 4 mm and gives the machine its position signal.
This is a compatible, non-genuine replacement. It is not a Haas product: it is manufactured in China, it carries no Haas part number, no factory calibration and no Haas warranty, and the supplier declares no certification for it. Fitment is determined by the type code printed on the part and by the machine it is fitted to.
The type code NBB4-12M45-Z5-0.33M-V1 is a Pepperl+Fuchs code, so the figures below are the Pepperl+Fuchs datasheet values for that type. The supplier of this part declares the manufacturer as Yueqing ailishun automation co., ltd, in Yueqing, Zhejiang, China.
Specification (NBB4-12M45-Z5-0.33M-V1)
| Switching function | Normally closed (NC), reverse polarity protected |
|---|---|
| Output type | 2-wire DC, 100 mA switching current |
| Operating voltage | 10 - 30 V DC |
| Rated operating distance sn | 4 mm |
| Assured operating distance sa | 0 - 3.24 mm |
| Connection type | Fixed cable with plug, M12 x 1, 3 pins |
| Cable | PUR, 4.8 mm diameter, 2 cores 0.34 mm2, 0.33 m |
| Housing | Nickel-plated zinc with integrated mounting bracket |
| Sensing face | Crastin (PBTB) |
| Degree of protection | IP68 |
| Ambient temperature | 0 to 60 degrees C |
| Threading | M12 x 1 |
Photographs
The photograph on this page is the family photograph used across our Haas-compatible NBB4-12M45 switch listings, so it shows the standard 12 mm sensor body, its mounting bracket and the coiled lead with its printed tag rather than this specific variant. The unit supplied is the Z5-0.33M-V1 type: 2-wire, normally closed, 10 - 30 V, 0.33 m lead ending in an M12 x 1 three-pin plug. The code stamped on the barrel of the sensor you are replacing is the check to make before ordering.
The figures above are taken from the Pepperl+Fuchs datasheet for the NBB4-12M45-Z5-0.33M sensor, with the connector termination used by the -V1 versions of this family as documented for the NBB4-12M45-Z4-0.3M-V1.
Condition
New, unused.
Delivery
Allow 15 working days for delivery to UK addresses.
Not sure this is the right sensor?
Send us the code marked on the barrel of the sensor you are replacing, or the machine make, model and axis, and we will confirm the correct type before you order. The E, E0, E1, E2, Z0, Z4, Z5 and V1 suffixes all change the switching function, the output type or the cable termination, and they are not interchangeable.




