60KTYZ Gear Reduction Motor 110V 5RPM - Compatible Alternative for Haas Coolant Tank Oil Skimmer
60KTYZ built-in reduction gear motor, 110V AC, 14W, 5 RPM no-load speed, 7mm D-type output shaft – supplied as a compatible alternative for Haas-type coolant tank oil skimmers. Check voltage, speed, shaft and mounting before ordering.
This is a 60KTYZ built-in reduction gear motor, supplied as a compatible alternative for the drive motor of a Haas-type coolant tank oil skimmer. It is a new unit with the reduction gearbox built into the motor body, so there is no separate gearbox to line up on the spindle.
Please read this before ordering. This motor is rated at 110V AC and turns at 5 RPM. The Haas coolant tank oil skimmer part 09-0989 is a 120V 60Hz fixed speed unit, and the replacement motor commonly used on that skimmer is 115VAC 7 RPM - so both the voltage and the speed are different from this motor. If the motor you are removing is not 110V AC, or if your skimmer depends on a particular skim speed, this is not the part you want. Send us the part number from the motor you are removing and we will confirm before you order.
Where it is used
Drive motor for a coolant tank oil skimmer on Haas machines that have an external coolant tank. Haas fits the oil skimmer to the 45 gallon (170 L), 55 gallon (208 L) and 95 gallon (360 L) coolant tanks. On ST-10, ST-15 and ST-15L machines the skimmer also needs the Haas oil skimmer mount bracket kit part 93-1001137 - the bracket is not included here. The oil skimmer itself, the tank, the mounting bracket and the drive disc or spindle are not included - this listing is the motor only.
Before you replace the motor - if your skimmer still turns but is no longer skimming, the official Haas service route is the tube and gears replacement kit part 93-2352, not a bare motor, so that kit is very likely the correct fix. This listing is a compatible alternative motor. It is not an original Haas part, and we do not claim it is a direct or exact fit.
Specification
| Model | 60KTYZ |
|---|---|
| Motor type | Claw-pole permanent magnet synchronous motor with built-in reduction gearbox |
| Rated voltage | AC 110V |
| Rated power | 14W |
| No-load speed | 5 RPM |
| Output shaft | D-type, 7mm diameter, with cross hole |
| Output shaft length | 25mm |
| Body size | 60 x 61mm |
| Direction of rotation | CW or CCW, set by which outer terminal the supply is connected to |
| Capacitor | 1.55 microfarad / 630V, fitted |
| Housing material | Metal |
| Quantity supplied | 1 off |
Check before you order
Measure and check the motor you are removing against the figures above:
- Voltage - this motor is 110V AC. It must not be connected to a 220-240V supply.
- Speed - 5 RPM at this motor. A faster motor skims more quickly, a slower one skims more slowly; if your skimmer was set up for a particular speed, check this is acceptable for your application.
- Shaft - 7mm D-type with a cross hole, 25mm long. If your existing drive uses a pin or set screw into a cross hole, this matches that arrangement; if it uses a different shaft diameter or a key, it does not.
- Mounting flange - square flange on a 60mm body. Check the flange hole spacing and the hole diameter against your existing bracket before you order, and check that the shaft end will clear your drive.
- Rotation - reversible by the wiring, so it can be turned to suit the direction your skimmer needs.
If any of these do not match, send us the part number from the motor you are removing and a photo of the mounting bracket and we will tell you honestly whether this one will work.
Delivery
Delivery estimate: 2 working days. Our estimate is 2 working days to dispatch. If you need the motor urgently, call us and we will tell you honestly what we can do.
About the photographs
The photographs are the supplier's own studio photographs of the motor supplied, cropped to the two views that show the shaft and terminal block end and the mounting flange end. Nothing has been digitally altered on the motor itself. The unit carries a maker's specification label on its body carrying the model and rating data, and that label is not shown in our photographs.
Supplied by us
Supplied as a new part. We make no separate authenticity or origin warranty claim of our own, and your statutory rights under the Consumer Rights Act 2015 are unaffected.




