Skip to content
Home›Haas›NBB4-12M45-Z5-0.33M Compatible Proximity Switch for Haas CNC - 2-Wire NC, 4mm Flush, 10-30V, 0.33m Cable with Wire End Ferrules
Compatible NBB4-12M45 inductive proximity switch for Haas CNC - 12 mm barrel sensor with integrated mounting bracket and pre-wired lead
✓ In Stock — 100 unitscnc proximity

NBB4-12M45-Z5-0.33M Compatible Proximity Switch for Haas CNC - 2-Wire NC, 4mm Flush, 10-30V, 0.33m Cable with Wire End Ferrules

Part No.CMTR-HAAS-NBB4-Z5-033M
CategoryHaas
Est. Delivery Time15 working days
DeliveryDispatched from UK
Some items ship directly from our suppliers. No additional charges — ever.
£74.88+ VAT
+ VAT · Free UK delivery
Qty
100 in stock
Free returns within 30 days
Dispatched from UK — no hidden charges
Technical support from our engineers
Purchase orders accepted

Haas-compatible NBB4-12M45-Z5-0.33M inductive proximity switch – 2-wire normally closed, 10-30 V, 4 mm flush sensing, 0.33 m lead with wire end ferrules. Compatible (non-genuine) replacement, not a Haas product.

NBB4-12M45-Z5-0.33M compatible proximity switch for Haas CNC machines

A 12 mm flush-mounting inductive proximity sensor intended as a replacement for the Haas axis reference, zero return and tool setting sensor of the same type code. The sensor detects a ferrous target at 4 mm and gives the machine its position signal.

This is a compatible, non-genuine replacement. It is not a Haas product: it is manufactured in China, it carries no Haas part number, no factory calibration and no Haas warranty, and the supplier declares no certification for it. Fitment is determined by the type code printed on the part and by the machine it is fitted to.

The type code NBB4-12M45-Z5-0.33M is a Pepperl+Fuchs code, so the figures below are the Pepperl+Fuchs datasheet values for that type. The supplier of this part declares the manufacturer as Yueqing ailishun automation co., ltd, in Yueqing, Zhejiang, China.

Specification (NBB4-12M45-Z5-0.33M)

Switching function Normally closed (NC), reverse polarity protected
Output type 2-wire DC, 100 mA switching current
Operating voltage 10 - 30 V DC
Rated operating distance sn 4 mm
Assured operating distance sa 0 - 3.24 mm
Connection type Cable with wire end ferrules
Cable PUR, 4.8 mm diameter, 2 cores 0.34 mm2, 0.33 m
Housing Nickel-plated zinc with integrated mounting bracket
Sensing face Crastin (PBTB)
Degree of protection IP68
Ambient temperature 0 to 60 degrees C
Threading M12 x 1

Photographs

The photograph on this page is the family photograph used across our Haas-compatible NBB4-12M45 switch listings, so it shows the standard 12 mm sensor body, its mounting bracket and the coiled lead with its printed tag rather than this specific variant. Note that the lead in the photograph ends in an M12 plug, while the unit supplied here is the plain Z5-0.33M type: 2-wire, normally closed, 10 - 30 V, 0.33 m lead ending in bare wire end ferrules and no connector. The code stamped on the barrel of the sensor you are replacing is the check to make before ordering.

Condition

New, unused.

Delivery

Allow 15 working days for delivery to UK addresses.

Not sure this is the right sensor?

Send us the code marked on the barrel of the sensor you are replacing, or the machine make, model and axis, and we will confirm the correct type before you order. The E, E0, E1, E2, Z0, Z4, Z5 and V1 suffixes all change the switching function, the output type or the cable termination, and they are not interchangeable.

Browse Related Categories

Haas

You Might Also Like

Recently Viewed