CS1-M Compatible Magnetic Reed Switch for Pneumatic Cylinders - Groove Mount, 5-240V AC/DC, Red LED, IP67
CS1-M compatible magnetic reed switch for DNC standard cylinder (ISO 15552) pneumatic cylinders. 5-240V AC/DC, red LED indicator, IP67. Compatible (non-genuine) replacement.
CS1-M compatible magnetic reed switch for pneumatic cylinders
A CS1-M magnetic reed switch that senses the position of the piston
inside a pneumatic cylinder, supplied as a compatible (non-genuine) replacement
for the equivalent part. It mounts directly into the groove on the cylinder body and signals
when the magnet in the piston passes the switch, so a PLC or relay knows whether the cylinder
is fully out or fully in.
The CS1 codes differ in body shape and mounting profile - they are not
interchangeable. This code is the one specified for DNC standard cylinder (ISO 15552), 40 Gauss sensitivity, no bracket required.
Specification (CS1-M)
| Switch type | Magnetic reed switch, groove mount, normally open |
|---|---|
| Applicable cylinder | DNC standard cylinder (ISO 15552), 40 Gauss sensitivity, no bracket required |
| Operating voltage | AC/DC 5 to 240 V |
| Max switching current | 100 mA |
| Max contact rating | 10 W |
| Switching frequency | 200 Hz (2-wire) / 1000 Hz (3-wire) |
| Indicator light | Red LED illuminates when the switch is active |
| Cable | Two-core oil-resistant PVC, 1.5 m |
| Protection | IP67 |
| Operating temperature | -10 to +70 degrees C |
| Housing | Moulded plastic body, glass-encapsulated reed element |
Condition
New, unused.
Delivery
Allow 15 working days for delivery to UK addresses.
Not sure this is the right switch?
Send us the code marked on the switch you are replacing, or the make and model of the
cylinder, and we will confirm the correct code before you order. Mounting groove profiles
differ between the CS1 codes and a mismatch will not clamp into the cylinder.
