D-F8P Compatible Magnetic Switch for Pneumatic Cylinders - Solid state auto switch, direct mounting, 3-wire, PNP - Replaces SMC D-F8P
D-F8P compatible magnetic switch for pneumatic cylinders. solid state auto switch, direct mounting, 3-wire, pnp output. Red LED indicator. Compatible (non-genuine) replacement, UKR marked.
D-F8P compatible magnetic switch for pneumatic cylinders
A D-F8P magnetic switch for detecting the piston position of a
pneumatic cylinder, supplied as a compatible (non-genuine) replacement for
the equivalent SMC D-F8P code. The switch is not manufactured by SMC: the body carries the
UKR mark. It is a drop-in replacement for the original part, matching the
published SMC specification for that code - the electrical ratings, wiring and lead options
are listed below.
Use it to confirm that a cylinder has fully extended or fully retracted, or to feed
position feedback to a PLC or relay. On a solid state version the output is an open-collector
transistor for direct connection to a PLC input; on a reed version the output is a
normally-open reed contact that needs a load connected in series with it.
Specification (D-F8P)
| Switch type | D-F8 solid state auto switch, direct mounting |
|---|---|
| Electrical entry | Perpendicular |
| Wiring | 3-wire |
| Output | PNP (open collector) |
| Applicable load | IC circuit, 24 VDC relay, PLC |
| Power supply voltage | 5, 12 or 24 VDC (4.5 to 28 V) |
| Current consumption | 10 mA or less |
| Load current | 80 mA or less |
| Internal voltage drop | 0.8 V or less |
| Leakage current | 100 uA or less at 24 VDC |
| Indicator light | Red LED illuminates when turned ON |
| Lead wire | 3 cores (brown, blue, black), oil-resistant heavy-duty PVC, 2.7 mm sheath, 0.15 mm2 |
| Weight | 7 g at 0.5 m |
| Protection | IP67 enclosure |
| Operating temperature | -10 to +70 degrees C |
| Certification | CE and UKCA marking |
Condition
New, unused.
Delivery
Allow 15 working days for delivery to UK addresses.
Not sure this is the right switch?
Send us the code marked on the switch you are replacing, or the machine make and model,
and we will confirm the correct code before you order. The mounting style, wiring and
indicator version all differ between codes in this range and are not interchangeable
one for one.
