Mileseey TR10 Handheld Infrared Thermal Imager 192x192 - Thermal Camera for Electrical Fault Finding, Leak Detection and PCB Inspection
Mileseey TR10 handheld infrared thermal imager, 192×192 detector, -20C to 550C, <50mK, 2.8in LCD. CNC electrical fault finding. 15-day delivery.
The Mileseey TR10 is a hand-held infrared thermal imager built for fault-finding work on CNC machines, electrical panels, motors and electronic assemblies. It shows a live thermal picture rather than a spot reading, so you can see where the heat is, not just how hot it is.
Why engineers use it on a machine
- Spot a failing drive or motor early - an overheating spindle drive, a chiller that has stopped switching, a motor running hot on one phase, all show up as a hot spot long before a trip.
- Electrical panels and switchgear - a loose connection or a failing contactor shows a clear thermal signature against the rest of the board.
- PCB and component testing - check a board for a shorted regulator, a dry capacitor or a reworked joint without taking it out of circuit.
- Cooling system checks - confirm coolant flow and radiator output, and check for blocked heat exchangers and cooling fans that are not running.
- General site inspection - floor heating, insulation, water ingress and air leaks all benefit from a thermal survey.
Specification
- IR detector resolution: 192 x 192 pixels
- Display resolution: 240 x 240 (upscaled from the 192 x 192 detector)
- Temperature range: -20°C to 550°C (-4°F to 1022°F)
- Thermal sensitivity (NETD): <50 mK
- Frame rate: 25 Hz
- Screen: 2.8 inch LCD
- Battery: rechargeable 3.7 V, 3000 mAh, up to 8 hours runtime
- Auto power-off: 5 / 10 / 30 minutes
- Adjustable screen brightness: low / mid / high
- Picture storage: 30,000+ images
- Detection features: centre point, hot point and cold point measurement, high/low temperature alarm, 8 colour palettes, adjustable emissivity
- Protection: IP54
- Certification: CE, FCC
- Supplied with: TR10 thermal camera, quick user guide, USB-C cable, hanging strap
Notes
Best accuracy is achieved within 2 metres of the target. Set the emissivity to match the surface you are measuring (matt painted metal is around 0.95, bare or oxidised metal much lower) or the reading will be out.
Supplied as pictured. We make no claim about the condition or origin of this instrument beyond what is visible in the photograph.
Delivery
Dispatched from our UK warehouse within 2 working days. 15 working days delivery.




