CNC Z-Axis Tool Setter - Mechanical Dial 0-2mm 0.01mm Resolution with Magnetic Base and Storage Box
Mechanical CNC Z-axis tool setter for setting tool length offsets. 0-2mm range, 0.01mm resolution dial with 0-2 revolution sub-dial, magnetic base with four magnets and a storage box supplied. No battery needed.
A Z-axis tool setter (tool zero pre-setter) is how you set the length offset on a CNC tool without taking a cut to prove it. You drop the tool tip onto the setter's anvil, read the height, and enter that as the tool length offset in your control. It removes the guesswork from a job where a 0.05 mm error can scrap a workpiece or, worse, crash a spindle into a table.
This is the mechanical dial version. The pointer reads directly off a graduated dial face, so there is no battery to run down and nothing to switch on before you can use it - which matters on a shop floor where the setter lives in a drawer and gets used between setting up and the first part.
Four strong magnets are set into the base, so the setter grips a steel machine table or the workpiece itself and will not slide while you bring the tool down on it. It can be used on its base or turned on its side for awkward approaches.
Specification
| Instrument type | Mechanical dial indicator (no battery required) |
|---|---|
| Measuring range | 0 - 2 mm |
| Resolution | 0.01 mm |
| Graduation | 0.1 mm / .001" |
| Dial reading | 0-90 main scale with a 0-2 revolution sub-dial |
| Contact surface | Hardened steel measuring head |
| Base | Magnetic base with 4 strong magnets |
| Case | Storage box supplied - plastic or metal box supplied at random |
| Calibration | Factory adjusted - do not open or adjust the instrument |
Before you order - check these three things
- This is a zero-setting instrument, not a general-purpose measuring tool. It is for establishing a tool length reference, not for measuring the size of a workpiece.
- The measuring head is hardened steel. Do not let the tool tip strike it, and do not bring it into contact with the workpiece - the head is for a tool tip to rest on.
- The instrument is factory adjusted. Opening it or adjusting it yourself will put the accuracy out, and it is not a user-serviceable item.
A storage box is supplied. The box is a plastic or metal box and the supplier ships that at random, so the box you receive may be either.




