CNC Z-Axis Tool Setter - Electronic Digital LCD 0.01mm with Magnetic Base and Storage Box
Electronic CNC Z-axis tool setter for setting tool length offsets. 2.5mm range, 0.01mm resolution LCD with mm/inch and ZERO buttons, magnetic base with four magnets, storage box supplied. Battery not included.
A Z-axis tool setter (tool zero pre-setter) is how you set the length offset on a CNC tool without taking a cut to prove it. You drop the tool tip onto the setter's anvil, read the height, and enter that as the tool length offset in your control. It removes the guesswork from a job where a 0.05 mm error can scrap a workpiece or, worse, crash a spindle into a table.
This is the electronic digital version. The reading appears on the LCD in millimetres or inches, so it can be read directly from the front of the machine, and the ZERO button sets the reference on the spot when you need to re-zero against the table. It switches itself on when you slide it and off again after five minutes of no operation, so there is no on/off to forget.
Four strong magnets are set into the base, so the setter grips a steel machine table or the workpiece itself and will not slide while you bring the tool down on it. It can be used on its base or turned on its side for awkward approaches.
Specification
| Instrument type | Electronic digital LCD indicator |
|---|---|
| Measuring range | 2.5 mm |
| Resolution | 0.01 mm / 0.0005" |
| Repeatability | 0.01 mm / 0.0005" |
| Body height | 50 +/- 0.01 mm |
| Display | Large LCD with mm/inch and ZERO buttons |
| Power supply | 1.5V button battery (LR44 type) |
| Base | Magnetic base with 4 strong magnets |
| Case | Storage box supplied - plastic or metal box supplied at random |
| Calibration | Factory adjusted - do not open or adjust the instrument |
Before you order - check these three things
- This is a zero-setting instrument, not a general-purpose measuring tool. It is for establishing a tool length reference, not for measuring the size of a workpiece.
- The battery is not included. The supplier's own note in the listing pictures states that the LR44 cell is not included for air shipment. The instrument takes a single 1.5V button cell (LR44 type), so fit your own before first use.
- The measuring head is hardened steel. Do not let the tool tip strike it, and keep it clean and free of swarf and cutting fluid.
A storage box is supplied. The box is a plastic or metal box and the supplier ships that at random, so the box you receive may be either.
A note on the housing colour
There are two colour options published for this electronic model - a dark grey/black housing and a blue housing. The supplier states plainly that the goods colour is sent at random, so the housing you receive may be either the dark one or the blue one. The photographs on this listing show one housing only, and the instrument, the range, the resolution and the box are identical either way - it is the colour of the housing that varies, not the instrument.




