EDR-75-12 Compatible DIN Rail Power Supply 12V 6.3A 75W - Non-Genuine Replacement For Mean Well EDR-75-12

EDR-75-12 compatible DIN rail power supply, 12V 6.3A, 75W. Third-party replacement carrying the EDR-75-12 code – not a Mean Well part. Check the code on the unit you are replacing.

EDR-75-12 compatible DIN rail power supply — 12V, 6.3A, 75W

Read this first. This is a third-party replacement that carries the code
EDR-75-12. It is not a Mean Well part. The badge on the front is an
imitation of the Mean Well trade mark, not the trade mark itself — you can see it in the
photograph, and we are not going to pretend otherwise. If you specifically need a genuine Mean Well
unit with the manufacturer's warranty and support, buy the genuine part. This listing is here for
the machine job where a control cabinet needs a 12V rail supply and the code has to be matched.

What it replaces

• Replacement for the Mean Well EDR-75-12 — 12V, 6.3A, 75W, DIN rail
  mounting, same case size
• Check the code printed on the unit you are removing. It must read
  EDR-75-12.

Specification — as marked on the unit supplied

• Model code on the label: EDR-75-12
• Output: 12V DC, 6.3A (75W)
• Input: 100-240VAC, 1.4A, 50/60Hz
• Output adjustment: +V ADJ potentiometer; DC OK status indicator
• Terminals: DC output (−V, −V, +V, +V) top; AC input (earth, N, L) bottom
• Mounting: DIN rail TS-35 (7.5 or 15), 32 (W) × 125 (H) × 102 (D) mm
• Cooling: free-air convection through the ventilated case

How this compares with the genuine Mean Well EDR-75-12

The manufacturer's own datasheet gives, for the genuine EDR-75-12: 12V / 6.3A ±2.0%,
80mV ripple, 85.5% efficiency, input 90-264VAC, working temperature
−20°C to +60°C, and a 2-year manufacturer warranty.

• The unit supplied here is marked 100-240VAC input, so it does not cover the
  genuine part's 90V lower limit.
• There is no manufacturer warranty on this unit, and no manufacturer support behind it. Our own
  returns policy applies.
• The physical dimensions and the output rating match the genuine part, so it bolts into the same
  DIN rail space and carries the same load.

Not this part

• EDR-75-24 — 24V 3.2A, not 12V
• EDR-120-12 / EDR-120-24 — 120W units, different current rating
• NDR-75-12 — NDR series, different case and different EMI class and
  working temperature range. Not interchangeable with the EDR.
• Anything whose label does not read EDR-75-12

On fitting, confirm the output voltage at the terminals and check your load current against the
6.3A rating before you rely on it in a machine.

Condition

Supplied as pictured. We make no claim about the condition or origin of this unit beyond what is
visible in the photograph, and we will not assert what we cannot verify. If condition matters to you,
ask us for a photograph of the exact unit before you order.

Delivery

15 working days from order.